SO I have a local hardware store where they cut out all of my crazy wood ideas! They only charged me $11 for the wood and cuts to give the Headboard the shape I wanted. Then I used bed topper foam and dacron for the soft upholstered look. I contemplated tufting it, but I knew I was going to use a very busy patterned fabric, so I just got about 4 yards of nailhead trim to go around the edge of it.
I was having a pretty hard time finding a fabric that I liked (plus a price I liked) for the drapes and headboard, I had already purchased a stencil from Cutting Edge Stencils to do in a nook in the room. I had remembered seeing a couple things on different blogs about stenciling fabric with fabric paint, so I bought some inexpensive fabric in cream, laid it all out and started painting the stencil on!

After I let the fabric dry I cut it out and stretched it onto the wood and foam, and started to staple it on.After I was done attching the fabric. I spray painted the nailhead trim which was gold to a silver then started hammering it on about 3 inches from the edge. It was my first time using this type of trim and I was worried about the corners that had been cut out and going around them with the trim, but the trim just bent however I wanted it ( it was pretty forgiving) and turned out much better than I thought!

I attached legs and drilled holes at the bottom, so that it could be attached to the metal frame.
Here is a photo of the finished Headboard and the drapes as well!
















Then the next step was to start my stencil in white on the top of table. The stencil is from 

The next step was to stain the top over the stencil, I used a dark walnut stain. I love the way my new end table came out!


So of course I had to figure out something really cool to turn this into....What about 2 benches for the end of a bed? Why not? So I had my hubby saw it in half.
I LOVE the medalions!













